34
~
6.
Optics
.-
...
Q.
o
lenses
All
ARRIFLEX
lenses
with
a PL-mount can be used on the
ARRIFLEX
535B.
Lenses
with a
41
mm
standard
or
ba-
. : yonet mount can
not
be used. Heavy
and
long lenses,
such as zoom-lenses, must be supported at all times.
Attaching
Lenses
• Remove the protective
cap
from the lens mount
receptacle
by
turning the bayonet ring counter-
clockwise as far as it
will
go
and
then pulling out the
protective cap.
•
Push
the lens into the lens mount receptacle without
catching it at the edges.
One
of
the four slots on the
lens mount must slide over the index pin
•
Press
the lens flat onto the lens mount receptacle
and
tvvist the bayonet ring clockwise to tighten.
Adjusting
the
Lens
Mount
Receptacle
to
the
Super
35-Format
For filming
with
the Super
35
format the lens mount
receptacle must be turned
180°.
Viewfinder
System
The
viewfinder
system on the
ARRIFLEX
535B
can be
swivelled in
tvvo
axes. The
viewfinder
image
is
always
upright
and correct left-to-right when the viewfinder
is
swivelled within the main axes.
A
video
optical tap
is
integrated into the viewfinder
system.
The
entire
viewfinder
system can be replaced
by
a
video
finder (100%)
without
tools.
With
slide-in masks the filming format currently in
use
is
displayed
in
the
viewfinder
as an illuminated frame.
The intensity can be continuously adjusted with
the
ARRIGLOW.
•
To
do
this remove the six cylinder screws
• Turn the lens mount receptacle
so
that
the
figure
..
2"
stands next to the marking
• Unscrew the index pin
and screw into
he
inner
thread opposite.
• Replace the six
cylinder
screws
and screw these
tight.
.. 1
\
I
J
"I
Comments to this Manuals