ARRI SFHC-1 User Manual Page 1

Browse online or download User Manual for Camera accessories ARRI SFHC-1. 2297 Kb Arri 435 Intervalometer Technical Data Sheet

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Arri 435 Integrated Intervalometer
Panavision
Australia
Sydney
(02) 9436 1844
Melbourne
(03) 9646 3044
Gold Coast
(07) 5585 9543
Panavision
Lighting
Sydney
(02) 9697 7000
Gold Coast
(07) 5556 0200
ASC
Sydney
(02) 9901 4455
John Barry
Sales
Sydney
(02) 9439 6955
Melbourne
(03) 9646 4088
Gold Coast
(07) 5585 9543
Panavision
New
Zealand
Auckland
64 9 378 9493
Wellington
64 4 384 4192
The Arri 435 Integrated Intervalometer
(SFHC-1 plus ICS-1) is an elegant and
easy to use system for single frame or
time frame shooting with the Arri 435
camera.
A hand control easily and clearly controls
exposure time, interval, burst and the
integrated in-gate capping shutter.
Due to the design of mirror-reflex cameras,
stray light can pass around the mirror
shutter onto the film when the camera is
not running. For normal filming this is not a
problem, as the affected frames fall into
the camera run-up, which is usually not
used anyway. However on single frame
shots, this stray light can fall onto the film
during the interval between exposures. To
prevent this fogging during the interval
time, it is necessary to use a capping
shutter.
Unlike normal in-font of the lens leaf capping
shutters, the integrated capping shutter is
compact, has a quicker reaction time,
does not interfere with matte boxes or filters
and makes it possible to look through the
view finder at all times.
Under normal conditions the integrated
capping shutter allows intervals of up to
one hour without any fogging occurring.
The following parameters can be set on
the hand control:
Exposure time from 1/8 second to 999
seconds when a camera shutter angle of
180° is used. 1/128 second exposure time
is possible when 11.2° shutter is used.
Interval of 1 second to 99 hours, 99 minutes.
Burst from 1 to 99 frames.
When the hand control is switched to single
frame mode, the camera LCD display
gives a read out of exposed frames, burst
and the remaining interval time.
When the intervalometer is fitted to the
camera, single frame mode can be
switched off with the hand control and the
camera used for normal filming. With the
intervalometer fitted, the maximum speed
is 120 f.p.s.
Easy to program
Integrated in-gate capping shutter
Exposure time from 1/8 second to 999
seconds
Interval from 1 second to 99 hours,
99 minutes
Burst from 1 to 99 frames
Single frame mode can be switched
off and the camera used for normal
filming up to 120 f.p.s. even with the
intervalometer fitted
Technical
Data
Sheet
Summary of Features
Press to expose a single frame manually
LEDs displaying status of capping shutter
Press to open /close capping shutter manually
Switch single frame mode on / off
Switch interval mode on / off
Switch interval time from seconds to
fractions of a second.
Set exposure time
Set interval time
Change interval time from hours :minutes to
minutes : seconds
Set burst
Page view 0
1

Summary of Contents

Page 1 - Summary of Features

Arri 435 Integrated IntervalometerPanavisionAustraliaSydney(02) 9436 1844Melbourne(03) 9646 3044Gold Coast(07) 5585 9543PanavisionLightingSydney(02) 9

Comments to this Manuals

No comments